Facebook

Here is the most advanced line of maple sugaring products
ever offered patented or patent pending.

Patended & Patent pending.

Sap spouts & Adapters

The only patented thin walled sap spouts & Adapters on the market.

Our sap spouts & adpters:

SP225: .225" Straight Sap Spout for 5/16"

Suggested product

FTA-90
(90° sap spout adapter)

COLM-516
(Multifunction collar)

For retapping

TTTL-SP225
(Installation tool for
straight sap spout)

Drill bit

35M01-225

The only patented thin walled sap spouts on the market.

This sap spout has an extremity of +/- .225".

  • Flexible, will adapt to the tapping hole
  • Micro leak free (even on high vacuum)
  • Drastically reduce the compartmentalization effect for healthier maples
  • Made of high quality, ultra-resistant polycarbonate
  • Material without BPA, with UV protection and FDA approved
  • Available in clear or translucid blue
SP115-225: 115° Sap Spout for 5/16"

115° Sap Spout

Suggested product

TTTL-SP115
(Installation tool for
115° sap spout or saddle)

Drill bit

35M01-225

The only patented thin walled sap spouts and Adaptors on the market.

This sap spout has an extremity of +/-.225".

  • Flexible, will adapt to the tapping hole
  • Micro leak free (even on high vacuum)
  • Drastically reduce the compartmentalization effect for healthier maples
  • Allows to put the drop line parallel to the tree
  • Made of high quality, ultra-resistant polycarbonate
  • Material without BPA, with UV protection and FDA approved
  • Available in clear or translucid blue
SP316: .172" Straight Sap Spout of 3/16"

.225" Straight Sap Spout

Use with

3/16" tubing

Drill Bit

35M01-172

The only patented thin walled sap spouts and Adaptors on the market.

This sap spout has an extremity of +/- .172".

  • Flexible, will adapt to the tapping hole
  • Micro leak free (even on high vacuum)
  • Drastically reduce the compartmentalization effect for healthier maples
  • Made of high quality, ultra-resistant polycarbonate
  • Material without BPA, with UV protection and FDA approved
  • Available in clear or translucid blue
1501-001C: .240" Bucket Sap Spout

.240" Bucket Sap Spout

Suggested products

15D01-002
(DSD Bucket hook)

BUC10L-B
(DSD Bucket)

BUC10L-CO-B
(DSD Bucket cover)

Drill Bit

35M01-240

The only patented thin walled sap spouts on the market.

This sap spout has an extremity of +/- .240".

  • Flexible, will adapt to the tapping hole
  • Drastically reduce the compartmentalization effect for healthier maples
  • Made of high quality, ultra-resistant polycarbonate
  • Material without BPA, with UV protection and FDA approved
  • Available in clear
SP115-225-P: .225" 115° Sap Spout - permanent for 5/16"

.225" 115° Sap Spout - permanent

Suggested product

TTTL-SP115
(Installation tool for
115° sap spout or saddle)

Drill bit

35M01-225

The only patented thin walled sap spouts and Adaptors on the market.

This sap spout has an extremity of +/- .225".

  • Flexible, will adapt to the tapping hole
  • Micro leak free (even on high vacuum)
  • Drastically reduce the compartmentalization effect for healthier maples
  • Allows to put the drop line parallel to the tree
  • Made of high quality, ultra-resistant nylon
  • Material without BPA, with UV protection and FDA approved
  • Available in blue or black
SP339-90-P: .339" 90° Sap Spout - permanent for 5/16"

.339" 90° Sap Spout - permanent

Drill Bit

35M01-339

The only patented thin walled sap spouts on the market.

This sap spout has an extremity of +/- .339".

  • Flexible, will adapt to the tapping hole
  • Micro leak free (even on high vacuum)
  • Made of high quality, ultra-resistant nylon
  • Material Without BPA, with UV protection and FDA approved
  • Available in blue or black
SPA339: .339" Adaptor

.339" Adaptor

To be used with

rigid 5/16" and 19/64"
sap spouts

Drill Bit

35M01-339

The only patented thin walled Adapters on the market.

This Adapter has an extremity of +/- .339".

  • Flexible, will adapt to the tapping hole
  • Micro leak free (even on high vacuum)
  • Made of high quality, ultra-resistant polycarbonate
  • Material without BPA, with UV protection and FDA approved
  • Available in clear or translucid blue
SPA225: .225" Adaptor for Sap Spout 19/64" & 5/16"

.225" Adaptor

To be used with

rigid 5/16" and 19/64"
sap spouts

Drill Bit

35M01-225

The only patented thin walled Adapters on the market.

This Adapter has an extremity of +/- .225".

  • Flexible, will adapt to the tapping hole
  • Micro leak free (even on high vacuum)
  • Drastically reduce the compartmentalization effect for healthier maples
  • Made of high quality, ultra-resistant polycarbonate
  • Material Without BPA, with UV protection and FDA approved
  • Available in clear or translucid blue
SPA225A: .225" Adaptor VER.A

.225" Adaptor VER.A

To be used with

rigid 5/16" and
19/64" sap spouts

Drill Bit

35M01-225

The only patented thin walled Adapters on the market.

This Adapter has an extremity of +/- .225".

  • Flexible, will adapt to the tapping hole
  • Micro leak free (even on high vacuum)
  • Drastically reduce the compartmentalization effect for healthier maples
  • Made of high quality, ultra-resistant polycarbonate
  • Material Without BPA, with UV protection and FDA approved
  • Available in clear or translucid blue

Connectors for tubing

5/16"
FTA90-K: Spout Adaptor 90° (Elbow) for 5/16"

Spout Adaptor 90°

Suggested product

SP225
(straight sap spout)

Made of strong black nylon, this 90° elbow spout adaptor is the perfect complement to the straight sap spout providing the option to put the drop at a 90° angle.

Using this adaptor with the straight sap spout prevents from cutting the drop line every year. At the end of the season remove the sap spout and insert the 90° adaptor on our T-Pin connector or our end line fitting for easy storage. Easy installation and easy to dismantel.

All connector ends are mirror polished for a perfect seal.

FTEL-K: End line fitting for 5/16"

End line fitting

Made of strong nylon, it’s powerful hook provides a solid grip to secure the end of the line.

This connector allows dismantling of the 5/16" to allow vehicule passage anytime, and to reconnect without cutting your 5/16" tubing . The pin connector is used for tube or spout storage.

All connector ends are mirror polished for a perfect seal.

FTT-K: T-Pin Connector for 5/16"

T-Pin Connector

Made of strong nylon, this part includes 3 open 5/16" tube connectors and one pin connector (for tube or spout storage).

All connector ends are mirror polished for a perfect seal.


FTU-K: Wire Union for 5/16"

Wire Union

Made with a high impact nylon, this piece includes two open connectors for 5/16" tubing and a strong hook to connect to the wire.

All connector ends are mirror polished for a perfect seal.

SEL516-K: Straight saddle connector for 5/16"

Straight saddle connector

The straight 5/16" tube connector is made with a high impact nylon.

With his two installation positions, the straight connector allows sap to enter without any restriction.

COLM516-K: Multifunction Collar for 5/16"

Multifunction Collar

Made of strong nylon, this collar is used to secure the tubing installation on the .225" (SP225) straight sap spout.

Easy to install and dismantel, the collar prevents any possibility of micro leakage when added to a 5/16" tubing.

The collar allows the removal of the .225" straight sap spout without having to cut the drop line.

Can also be used for storage of the drop line by inserting the pin into the end of the tube or your sap spout.

SEL-ELB-K: Saddle Elbow Connector for 5/16"

Saddle Elbow Connector

90° connector, made with a high impact nylon.

Still the most popular saddle fitting on the market.

Can be positioned before tightening the S.S. clamp.

SEL-CAP-K: Cap for saddle

Cap for saddle

Cap for saddle made out of high impact nylon.
Used to cover existing holes 5/16", 7/16" or 31/64".

5/16" and 3/16"
FTT316-516-K: T-Connector 2x 5/16", 1 x 3/16"

T-Connector 2x 5/16" 1 x 3/16"

Made of strong nylon, this part includes 2 open tube connectors for 5/16" and one open tube connector for a 3/16" drop line. Is also provided with a pin connector (for tube or spout storage).

All connector ends are mirror polished for a perfect seal.

FTU316-516-K: Wire union 3/16" - 5/16"

Wire union 3/16" - 5/16"

Made with a high impact nylon, this piece includes two open connectors. One for 5/16" tubing and one for 3/16" tubing.

The strong hook allows to connect to the wire.

All connector ends are mirror polished for a perfect seal.

3/16"
FTT316-K: T-Connector for 3/16"


Made of strong nylon, this part includes 3 open 3/16" tube connectors and one pin connector (for tube or spout storage).

All connector ends are mirror polished for a perfect seal.

FTU316-K: Wire union for 3/16"

Wire union

Made with a high impact nylon, this piece includes two open connectors for 3/16" tubing and a strong hook to connect to the wire.

All connector ends are mirror polished for a perfect seal.

FTEL316-K: End line fitting for 3/16"

End line fitting

Made of strong nylon, this part includes two open 3/16" tube connectors and one pin connector (for tube or spout storage).

The strong hook provides a solid dismountable grip to secure the end of the line.

All connector ends are mirror polished for a perfect seal.

20A03-188-313-K: Slider wire union for 3/16''

Slider wire union

Made of strong nylon, this part allows you to install the wire union without having to cut the 3/16" tubing. Includes one pin connector.

The strong hook allows to connect to the wire.

20A05-188-313-K: Slider end of line fitting for 3/16''

Slider end of line fitting

Made of strong nylon, this part allows you to install an end of line fitting without having to cut the 3/16" tubing. Includes one pin connector (for tube or spout storage).

The strong hook provides a solid dismountable grip to secure the end of the line.

SEL316-K: Straight saddle Connector for 3/16"

Straight saddle Connector

The straight 3/16" tube connector is made with a high impact nylon.

With his two installation positions, the straight connector allows sap to enter without any restriction.

Saddles and Collars

20B01: Tubing saddle 90° for tube 1/2", 3/4", 1", 1¼", 1½", 2" (including: connector and seal)

Tubing Saddle

Mainline Connector for tube ½", ¾", 1", 1¼", 1½", 2" Includes collar, 5/16" 90° connector and elastomer gasket.

This saddle has a 9/16" wide Heavy duty Stainless Steel grade 304 Collar.

The connector can be positioned in all directions (before tightening), Use on 5/16" holes and/or existing 7/16" or 31/64" holes simply by flipping the seal around.

All connector ends are mirror polished for a perfect seal.

Easy installation, micro leak free.

20B02: Straight tubing saddle for 5/16" (Connector & Seal included)

Straight tubing saddle for 5/16"

Mainline Connector for tube ½", ¾", 1", 1¼", 1½", 2" includes collar, 5/16" straight connector and elastomer gasket.

This saddle has a 9/16" wide Heavy duty Stainless Steel grade 304 Collar.

Use on 5/16" holes and/or existing 7/16" or 31/64" holes simply by flipping the seal around.

The connector end is mirror polished for a perfect sealing action.

Easy installation, micro leak free.

20B03: Straight tubing saddle for 3/16" (Connector & Seal included)

Straight tubing saddle for 3/16"

Mainline Connector for tube ½", ¾", 1", 1¼", 1½", 2" Includes collar, 3/16" straight connector and elastomer gasket.

This saddle has a 9/16" wide Heavy duty Stainless Steel grade 304 Collar.

Use on 5/16" holes and/or existing 7/16" or 31/64" holes simply by flipping the seal around.

The connector end is mirror polished for a perfect sealing action.

Easy installation, micro leak free.

20B04: Cap Saddle for tube 1/2" 3/4", 1", 1¼", 1½", 2" (including: cap and seal)

Cap Saddle

Mainline plug for tube ½", ¾", 1", 1¼", 1½", 2" includes collar, cap, and elastomer gasket.
9/16" Heavy duty Stainless Steel grade 304 Collar.

Use on 5/16" holes and/or existing 7/16" or 31/64" holes simply by flipping the seal around.

Easy installation, micro leak free.

30L02: Stainless Steel Collar grade 304 9/16" 14.2mm X 0.7mm - size: 3/4", 1", 1¼", 1½" (Collar only) - no hole

Stainless Steel Collar grade 304

Extra Heavy duty Stainless Steel grade 304 collar 9/16" Wide 14,2mm X 0,7mm ¾", 1", 1¼",1½" for plastic tubes where strength and long term service are required.

30L02-200, 30L02-300: Stainless Steel Collar grade 304 5/8" 15.8mm X 0.8mm - size: 2", 3" (Collar only) - no hole

Stainless Steel Collar grade 304

Heavy duty Stainless Steel grade 304: 5/8" Wide 15,8mm X 0,8mm 2" and 3" for plastics tube where very strong strength and long term service are required.

Other Products

35G01: DSD Spout Remover

DSD Spout Remover

The sap STARS rotative sap spout remover comes with a sturdy handle. It allows you to turn the sap spouts before removing them witout damaging the maples.

Can be used with all sap spouts.

Available sizes: 31 ½" and 43 ½".

TILE: Multisurface Non-slip Tiles

Multisurface Non-slip Tile

These multisurface tiles provide a non slip surface for optimal grip.

Protect concrete and cover cracks for a beautiful clean surface that will last for years.

Made of flexible material they will absorb shock providing unparalled comfort for long working hours.

5 attachement points per side for superior stability.

Dimensions: 9 ¾" x 9 ¾" (ribbed or smooth).

Come in black, forest green or medium gray.

15D01-001: Hook for Metal bucketl

Hook for Metal bucket

Stainless Steel bucket hook.

Use with traditional metal buckets.

15D01-002: Hook for DSD bucket

Hook for DSD bucket

Stainless Steel bucket hook.

Use with DSD Bucket : BUC10L-B.

TTL-SP225: Installation tool for Straight Sap Spout & adapter

Installation tool for Straight Sap Spout & adapter

Made of strong nylon this part was especially designed to retap the .225" (SP225) sap spout easily.

TTL-SP115: Installation tool for 115° Sap Spout & tubing saddles

Installation tool for 115° Sap Spout & tubing saddles

Easily insert the 115° sap spout on the 5/16" tubing or 90° saddle connectors on the mainline with this easy to use tool.

Made of high quality aluminium.

SEL-SEAL: Double sided Seal

Double sided Seal

Double sided seal made of elastomer material, offers long time memory for perfect sealing action.

To be used with our 90° saddle connector, straight saddle connector and Cap saddle.


25A13-188: Multifunctional Cap for 3/16"

Multifunctional Cap for 3/16"

Multifunction Plug maded of plastic and can be used for:

  • Closing a tap hole in compartmentalized wood allowing to drill a second hole without causing any micro leak between both tap holes.
  • Tube storage (drop line)
25A13-313: Multifunctional Cap for 5/16"

Multifunctional Cap for 5/16"

Multifunction Plug maded of plastic and can be used for:

  • Closing a tap hole in compartmentalized wood allowing to drill a second hole without causing any micro leak between both tap holes.
  • Tube storage (drop line)
35M01: Tapping drill bit

Drill bit for maple 1/4'' (0.221'')

Made of high speed steel protected against corrosion, these drill bits will insure a clean round tap hole free of debris.

Drill bit guide for Sap STARS sap spouts and adapters.

 

# Produit Description Mèche suggérée
SP225 .225" Straight sap spout 35M01-225
SP115-225 115° sap spout 35M01-225
SP115-225-P 115° permanent sap spout 35M01-244
SP339-90-P 90° .339" permanent sap spout 35M01-339
SP316 Sap spout for 3/16" 35M01-172
15B01-001C Bucket sap spout 35M01-240
SPA225 .225" sap spout adapter 35M01-225
SPA225-A .225" sap spout adapter 35M01-225
SPA339 .339" sap spout adapter 35M01-339
DRBP-5/16: Drill bit 5/16'' triple lips for Mainline

Drill bit for pipe 5/16'' (0.312'')

This drill bit is made of hss steel and protected from corrosion. Designed with threefold lips to create rapid and clean round holes on the mainline tube. To be used with a battery drill.

BUC10L-CO-B: DSD plastic Bucket cover 10L / 2.7 gal

DSD Bucket cover

DSD bucket cover. Made of high quality plastic, comes in transluid blue.

To be used with the DSD Bucket (BUC10L-B).

BUC10L-B: DSD plastic Bucket 10L / 2.7 gal

DSD Bucket

DSD bucket made of high quality plastic, this bucket has a back rounded shape for a better stability on the tree.

Stores 10 litres of liquid /2.7 gallons.

Come in translucid blue.

BV06-RD-K1: Safety spout for non-ventilated gas container

Safety spout for non-ventilated gas container

Safety spout for regular or non-ventilated gas container.

  • No spills, no mess, no evaporation
  • Angled end allowing you to see inside the container being filled
  • Auto shut off, when liquid touches the spout end.
    Flow reduces and automatically stops in most applications.
  • Child proof auto lock

Tubing & Mainline

TB: Fexiflo Mainline

Maître-ligne Fexiflo

Maître-ligne Fexiflo

Maître-ligne Fexiflo

FLEXIFLO mainline 100 & 125 PSI

High resistance tubing, smooth inside and outside, simplifies cleaning and reduces the proliferation of bacteria. Food grade, resistant to pressure and vaccum, made of polyethylene, UV resistant and very flexible.

Available in Blue, Light blue or Black.

TB316: Flexiflo Tubing 3/16''

Tubulure Flexiflo 3/16''

Tubulure Flexiflo 3/16''

FLEXIFLO 3/16" tubing

High quality tubing 4 seasons or semi- rigid, food grade, virgin raw material, smooth inside and outside, simplifies cleaning and reduces the proliferation of bacteria, made of elastomer, UV resistant.

Available in Blue or Light blue.

TB516: Flexiflo Tubing 5/16''

Tubulure Flexiflo 5/16''

Tubulure Flexiflo 5/16''

FLEXIFLO 5/16" tubing

High quality tubing 4 seasons, semi- rigid, or rigid. Food grade, virgin raw material, smooth inside and outside, simplifies cleaning and reduces the proliferation of bacteria, made of elastomer, UV resistant.

Available in Blue or Light blue.

10E01: Flexiflo Dropline 3/16''

Tubulure Flexiflo 5/16''

3/16" 4 seasons Pre cut drop lines, ideal to save time on drop line preparation.

Available in Blue or Light blue, 32", 36" or 40".

(100/pqt)

10E01: Flexiflo Dropline 5/16''

Tubulure Flexiflo 5/16''

5/16" 4 seasons Pre cut drop lines, ideal to save time on drop line preparation.

Available in Blue or Light blue, 32", 36" or 40".

(100/pqt)